SKU: 70711530896

Jorja Smith - Be Right Back (12", EP, Red)

$16.19 $17.99
Save 10%
No.2 Bestseller on chemicals-recycling.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 12 - Jul 17

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Jorja Smith - Be Right Back (12", EP, Red)Media Condition: Mint (M) Sleeve Condition: Near Mint (NM or M ) Comments: Sealed, brand new copy! General notes about this release (please note: our version may differ a little. see the comments above): Housed in a full colour, single sleeve jacket. Made in EU. Mastered by Giovanni Versari at La Maest, Faenza IT and Prash "Engine Earz" Mistry at Forwa3DStudios, London. Tracks A3 and B2 produced by Kal Banx for Top Dawg Entertainment and Jeff "Gitty"

Media Condition: Mint (M)
Sleeve Condition: Near Mint (NM or M-)

Comments:
Sealed, brand new copy!

General notes about this release (please note: our version may differ a little. see the comments above):
Housed in a full-colour, single-sleeve jacket. Made in EU. Mastered by Giovanni Versari at La Maestà, Faenza IT and Prash "Engine-Earz" Mistry at Forwa3DStudios, London. Tracks A3 and B2 produced by Kal Banx for Top Dawg Entertainment and Jeff "Gitty" Gitelman for Gitty Music, Inc. Tracks A1 and B3 recorded at Real World Studios, Strongroom Studios and Konk Studios. Track A2 produced at Kingsize Soundlabs (Studio V7), and choir recorded at Pulse Silverlake Studios (A Room). All other vocals recorded at Konk Studios, except B2.

 

A1. Addicted
A2. Gone
A3. Bussdown
A4. Time
B1. Home
B2. Burn
B3. Digging
B4. Weekend

 

Barcode and Other Identifiers:

Barcode 1 96006 38449 4
Barcode 196006384494
Matrix / Runout JS2021EP001LP A-2 STU
Matrix / Runout JS2021EP001LP B-2
Label Code LC 23398

 

Phonographic Copyright (p) FAMM (2)
Copyright (c) FAMM (2)
Recorded At Real World Studios
Recorded At Strongroom
Recorded At Konk Studios
Produced At Kingsize Soundlabs
Produced At Pulse Silverlake Studios
Produced For Top Dawg Entertainment
Produced For Gitty Music, Inc.
Mixed At Larrabee Sound Studios
Mastered At La Maestà
Mastered At Forwa3dstudios, London
Lacquer Cut At Metropolis Studios
Distributed By The Orchard

Data provided by Discogs
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 70711530896

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 2432 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
Mona T.
Lake Worth, US
★★★★★ 5
Attractive
Size: 4 Panel-88'', Color: Grey
The assembled product is just as described. The screens look great! I am using them to hide the cluttered shelving in my garage. The area now looks quite neat Something I must say, though, is that the assembly was extremely difficult. I had to use a silicone spray and some pounding to get the A and B poles to fit together. Also, it required a great deal of strength to stretch and hold the fabric panels so that the bars inserted in each hem lines up with the screws inserted in A/B poles. I strongly recommend having a partner to help with the assembly. while sc and screw into poles them once inserted intetchedtne end of each pole ( and B poles barely fit together. I used silicone spray on the end and then pounded them
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 12, 2025
K
Verified Purchase
karine
Port Orchard, US
★★★★★ 5
Works
Size: 3 Panel-102'', Color: Beige, Size: 3 Panel-102'', Color: Beige
It’s beige and not white. Once install - hard to disinstall. Need a drill to put it together
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
R
Verified Purchase
ralversity
Louisville, US
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
T
Verified Purchase
Talagand
Louisville, US
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
J
Verified Purchase
Jennifer
Natrona Heights, US
★★★★★ 5
Easy peasy
Size: 1 Panel, Color: Black
Bought this single-panel room divider for my son so he has a little privacy when he has to keep his camera on for online classes. It’s lightweight, easy to set up, and does the job—he can focus without me photobombing in the background. He can feel like he has his own tiny corner office, even if it’s just the basement.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 29, 2026

recommand products

energieke raverbril
17.99
oprechte elegantie armband
13.99
red vortex pvc xxl rave fans
24.99
Larry Wheeler - You Can't Lose Me / Honeystrollin' (7", Single)
27.99
metropunk ribbenkast lichaamsketting
19.99