Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 11 - Jul 16
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Vanquish LED Light Kit For VS4-10 Phoenix Incision Series 2 IRC00451Vanquish Light Kit For VS4 10 Phoenix and Phoenix Portal. Designed specifically for the VS4 10 Phoenix and its included molded front inner fenders. Features Molded front light buckets with high powered LED and heatsink Red LED tail lights White LED inner fender rock lights LED light controller Manual on off function Additional on off control from aux receiver channel. Headlights powered by 2 3S lipo balance plug on light controller Aux control and red
Vanquish Light Kit For VS4-10 Phoenix and Phoenix Portal.
Designed specifically for the VS4-10 Phoenix and its included molded front inner fenders.
Features
- Molded front light buckets with high powered LED and heatsink
- Red LED tail lights
- White LED inner fender rock lights
- LED light controller
- Manual on / off function
- Additional on / off control from aux receiver channel.
- Headlights powered by 2-3S lipo balance plug on light controller
- Aux control and red LED headlights powered by RX plug
Includes
- X2 Molded front led headlight housings with heat sink. direct fit / bolt pattern with Phoenix body grill
- X2 5mm red LED tail lights
- X2 PCB LED rock lights for use with VPS10180 Narrow Molded Inner Fenders (VS4-10 Phoenix Chassis)
- X1 LED controller with required power plugs
- And a nifty parts box
Installation Instructions for VS4-10 Phoenix
- Remove stock light buckets from VS4-10 grill. Mount included light assembly to the body with the existing 1-64 hardware. Red LED tail lights mount into stock VS4-10 rear LED housings.
- Remove stock rock light cap, place PCB LED's in place, replace cap.
- Connect LED plugs to the Light Controller. Connect Light Controller to 2s or 3s LiPo battery for headlight power source. Connect Light Controller to receiver to power red LED’s, for full
- functionality use an open auxiliary channel in receiver. Program auxiliary channel on transmitter for 2 positions (On/Off) with endpoints set to max for each position.
- The 3-position switch located on the LED light controller selects mode (Off / Aux CH on/off control / ON). To control LED function through the transmitter ensure the 3 position switch on
- LED light controller is in the middle position.
Installation tips
- Attach LED controller and rock lights to chassis.
- Connect and route headlight and tail light LED light wires to underside of body.
- Use Black 4 pin connection plug for easy removal of body.
- Use Balance plug and JST connection for power source and RX connection at chassis for easily removal.
- Note: JST power source powers head lights and rock lights. RX Aux powers taillights. Both power sources must be connected for full functionality.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 794 reviews
Sort
Product Reviews
★★★★★ 5
Broke the first day
I purchased the owl ball because of other dog chew toys I purchased from Amazon. Those other chew toys are still holding together. The main reason I got the owl ball is due to the different noises it makes other than the regular squeak noise. After giving the toy to my dog he loved it right away. He especially liked the noise it made. After a few hours, I noticed he was chewing a white tube-like device. I took this away from him and determined it was the noise maker in the owl ball. I examined the owl ball and noticed the glue used to keep the ball cap shut did not hold. On closer inspection, I noticed what looked like rubber cement was used to hold the cap on but if it was rubber cement it was used improperly. Anyway, I just reglued the cap correctly and now it's just a ball because my dog destroyed the noise maker.
OK, Since I posted this review I was contacted by the seller. They offered to give me a full refund for the owl ball. I accepted the offer. So, I will try it again, but buy a different color owl this time. I never expected a refund since it's just a ball now, my dog still plays with it and it is holding up very well. The material it is made from is pretty sturdy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 4, 2024
★★★★★ 3
Squeaker not working!
Color: Yellow
I'll give it 3 stars because I love the design and it's sturdy and great for dogs to hold/launch. That said, the squeaker doesn't really work... I tried everything but it just doesn't make any sound. My dog wasn't really interested but when it did make a slight sound he approached it. Once it stopped he lost interest. But he's very difficult to please😆 so if you have a normal dog, he'll probably like it!
I hope the manufacturer fixes the squeaker issue because apparently many people are having the same issue, which is a shame because the product is clearly well made!
I'm on the fence about returning it just because the quality it's amazing(squeaker issue aside)!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 19, 2025
★★★★★ 4
Sturdy rubber ball. Noise maker could be improved
Color: Red
I would have given it five stars because of how much, my dog loved it in the beginning.
And shut us up holds true as a sturdy rubber ball. My only complaint is at with one of my dogs being a heavy chewer, she was able to bust the noise making part. The ball never broke open or anything. It just no longer makes noise. You can hear the piece rattling on the inside. The ball itself is still solid tho
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 6, 2026
★★★★★ 1
POOR QUALITY WHILE OVER PRICED
Color: Brown
Like so many others said, the sound box in this ball is faulty. lasted ONLY for 30seconds. My dog loves the giggle ball I purchased prior so I knew she would like this as well. Well, she did, for that whole 30 seconds. Both of us were so disappointed we could not further our play. Plus this ball was so much smaller than expected for the cost. I would not have minded the cost had this ball been on the ball! Don't purchase this item. Buy the giggle ball instead if you haven't already.
UPDATE...
Ran across this message at a later date and I would like to thank the sellers at Mewlmart for their response and showing the best business practices as stated in their response below.
-----------------------
We sincerely apologize for any inconvenience regarding your order and would like to offer you a full refund for your purchase.
If you would like a full refund: please reply 'Full refund'.
We hope that you give us another chance. Thank you very much.
Best regards,
Mewlmart
-----------------------
Only thing is I wish I had seen their message earlier, as I believe the window of opportunity for a refund may no longer be applicable. But who knows, they may reach out and still honor it when they review this review. Will update if that happens as it is worth mentioning the extra mile they may take. I am sure I would just then turn around and buy another product from them, giving them another try:)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 2, 2024
★★★★★ 5
Brody loves the Owl ball
Color: Brown, Color: Brown
My dog loves this ball! He destroys every toy! He loves balls but he destroys all of them. He loves Owl ball! It’s challenging for him to pick up & loves the sound. Best toy he has! Keeps him entertained & he can’t destroy it!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 21, 2026
recommand products
Westin 2014-2015 Chevy Silverado 1500 E-Series Bull Bar - SS - 31-5980
240.99
Westin Bracket for 30 inch LED Curved Light Bar - Black - 32-20055
37.40
Microflex N173 Cobalt® Ultra N17 Nitrile Exam Gloves, Large
18.18
Westin 2007-2018 Toyota Tundra Ultimate Bull Bar - Textured Black - 32-2255
256.50
Westin 2004-2007 Chevrolet/GMC/Buick/Isuzu/Oldsmobile Rainier Safari Light Bar Mount Kit - Black - 30-1345
72.00