SKU: 11596457819

2020-2022 Polaris Ranger 1000 XP Crew EPS Texas Edition 93mm Cylinder Piston Gaskets Rebuild Kit

$155.14 $172.38
Save 10%
No.2 Bestseller on chemicals-recycling.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 11 - Jul 16

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

2020-2022 Polaris Ranger 1000 XP Crew EPS Texas Edition 93mm Cylinder Piston Gaskets Rebuild Kit93mm Cylinder Piston Gasket Top End Rebuild Kit Fit For Polaris Ranger RZR General XP 1000 2017 2026 Features: If your cylinder blows through, the compression is too low, or even a piston seizure has occurred, then this kit is exactly the right thing for you. Kit includes cylinder, domed piston, rings, pin, clips & top end gasket kit (you get exactly what is pictured). The cylinder is made of aluminum for good cooling with an internal cast iron

93mm Cylinder Piston Gasket Top End Rebuild Kit Fit For Polaris Ranger RZR General XP 1000 2017-2026

Features:
If your cylinder blows through, the compression is too low, or even a piston seizure has occurred, then this kit is exactly the right thing for you.
Kit includes cylinder, domed piston, rings, pin, clips & top end gasket kit (you get exactly what is pictured).
The cylinder is made of aluminum for good cooling with an internal cast iron jacket.
The gaskets use performance materials to increase durability and provide greater reliability.
Includes all gaskets pictured to rebuild top end.
Precision-machined and honed to OEM stock bore sizes - 93.0 mm x 73.5mm stroke, 20mm steel piston pin.
Extremely durable low-friction bore surface allows for greater heat dissipation.
This kit is excellent as a low-cost replacement for defects in the original cylinder.

Specifications:
Condition: Aftermarket 100% Brand New
Quantity: 1 Set
Material: Aluminum
Engine: 4-Stroke
Displacement: 999cc
Bore Type: Standard Bore
Bore diameter: STD 93mm
Stroke: 73.5mm
Pin diameter: 20mm
Pin length: 52mm

Replacement Part Number:
Cylinder: 3023156
Cylinder Base Gasket: 5272970
Cylinder Head Gasket: 5814793
Exhaust Gasket: 3610184
Piston Kit: 2205244
Pin, Piston (2): 3022358
Piston Rings Kit: 2204949
Circlips, piston (2): 3022413
Water Inlet Gasket: 5813736
Valve Spring Seat Seal(8): 3610212

(Always compare part numbers to your parts schematics and cross reference appropriately.)
(This is NOT a genuine Part, OEM part numbers are included for product type identification and comparison only.)

Fits Make/Model/Year:
Fit for Polaris General 1000 EPS • 2016-2020
Fit for Polaris General 1000 EPS Deluxe • 2016-2022
Fit for Polaris General 1000 EPS Deluxe w/Ride Command • 2022
Fit for Polaris General 1000 EPS Deluxe w/Ride Command and Stage 4 Rockford Fosgate® Audio Pkg • 2020
Fit for Polaris General 1000 EPS Hunter Edition • 2018-2019
Fit for Polaris General 1000 EPS Limited Edition • 2018-2019
Fit for Polaris General 1000 EPS Premium • 2018-2022, 2024-2026
Fit for Polaris General 1000 EPS Ride Command Edition • 2018-2019
Fit for Polaris General 1000 EPS Sport • 2021-2026
Fit for Polaris General 1000 XP EPS Deluxe • 2020
Fit for Polaris General 1000 XP EPS Deluxe w/Ride Command and Stage 4 Rockford Fosgate® Audio • 2020
Fit for Polaris General 1000 XP EPS Premium • 2023-2026
Fit for Polaris General 1000 XP EPS Sport • 2023-2026
Fit for Polaris General 1000 XP EPS Ultimate • 2023-2026
Fit for Polaris General 1000-4 EPS • 2017-2019
Fit for Polaris General 1000-4 EPS Deluxe w/Ride Command • 2022
Fit for Polaris General 1000-4 EPS Premium • 2021-2022
Fit for Polaris General 1000-4 EPS Ride Command Edition • 2019
Fit for Polaris General 1000-4 XP EPS Premium • 2023-2026
Fit for Polaris General 1000-4 XP EPS Sport • 2023-2026
Fit for Polaris General 1000-4 XP EPS Ultimate • 2023-2026
Fit for Polaris Ranger 1000 • 2021-2026
Fit for Polaris Ranger 1000 EPS • 2021-2026
Fit for Polaris Ranger 1000 EPS Premium • 2020-2026
Fit for Polaris Ranger 1000 XP Crew EPS 20th Anniversary • 2019
Fit for Polaris Ranger 1000 XP Crew EPS Big Game Edition • 2021-2022
Fit for Polaris Ranger 1000 XP Crew EPS High Lifter Edition • 2017-2022
Fit for Polaris Ranger 1000 XP Crew EPS Northstar Big Game Edition • 2022
Fit for Polaris Ranger 1000 XP Crew EPS Northstar Deluxe Edition • 2017-2019
Fit for Polaris Ranger 1000 XP Crew EPS Northstar Premium Edition • 2021-2024
Fit for Polaris Ranger 1000 XP Crew EPS Northstar Trail Boss • 2021-2024
Fit for Polaris Ranger 1000 XP Crew EPS Northstar Ultimate Edition • 2021-2024
Fit for Polaris Ranger 1000 XP Crew EPS Premium • 2017-2024
Fit for Polaris Ranger 1000 XP Crew EPS Sage Green • 2019
Fit for Polaris Ranger 1000 XP Crew EPS Texas Edition • 2020-2022
Fit for Polaris Ranger 1000 XP Crew EPS Trail Boss • 2021-2022
Fit for Polaris Ranger 1000 XP Crew EPS Waterfowl Edition • 2021-2022
Fit for Polaris Ranger 1000 XP EPS 2017
Fit for Polaris Ranger 1000 XP EPS 20th Anniversary 2019
Fit for Polaris Ranger 1000 XP EPS High Lifter Edition 2017-2022
Fit for Polaris Ranger 1000 XP EPS Matte Titanium 2018
Fit for Polaris Ranger 1000 XP EPS Northstar Deluxe Edition 2017-2019
Fit for Polaris Ranger 1000 XP EPS Northstar Edition w/Ride Command Pkg 2019
Fit for Polaris Ranger 1000 XP EPS Northstar Premium Edition 2021-2026
Fit for Polaris Ranger 1000 XP EPS Northstar Trail Boss 2021-2026
Fit for Polaris Ranger 1000 XP EPS Northstar Ultimate Edition 2021-2026
Fit for Polaris Ranger 1000 XP EPS Premium 2019, 2021-2026
Fit for Polaris Ranger 1000 XP EPS Premium w/Ride Command Pkg. 2019
Fit for Polaris Ranger 1000 XP EPS Pursuit Camo 2018
Fit for Polaris Ranger 1000 XP EPS Pursuit Camo Hunter Deluxe Edition 2017
Fit for Polaris Ranger 1000 XP EPS Ranch Edition 2017
Fit for Polaris Ranger 1000 XP EPS Sage Green 2018-2019
Fit for Polaris Ranger 1000 XP EPS Suede Metallic 2018
Fit for Polaris Ranger 1000 XP EPS Sunset Red 2018
Fit for Polaris Ranger 1000 XP EPS Trail Boss 2021-2022
Fit for Polaris RZR 1000 4 XP EPS 2017-2019
Fit for Polaris RZR 1000 4 XP EPS Dynamix Edition 2019
Fit for Polaris RZR 1000 4 XP EPS High Lifter Edition 2017-2022
Fit for Polaris RZR 1000 4 XP EPS Premium 2020-2024
Fit for Polaris RZR 1000 4 XP EPS Ride Command Edition 2018-2019
Fit for Polaris RZR 1000 4 XP EPS Sport 2021-2024
Fit for Polaris RZR 1000 4 XP EPS Ultimate 2023-2024
Fit for Polaris RZR 1000 S EPS 2017-2019
Fit for Polaris RZR 1000 S4 EPS 2019
Fit for Polaris RZR 1000 XP EPS 2017-2019
Fit for Polaris RZR 1000 XP EPS Dynamix Edition 2019
Fit for Polaris RZR 1000 XP EPS High Lifter Edition 2017-2022
Fit for Polaris RZR 1000 XP EPS Premium 2020-2024
Fit for Polaris RZR 1000 XP EPS Ride Command Edition 2018-2019
Fit for Polaris RZR 1000 XP EPS Sport 2021-2024
Fit for Polaris RZR 1000 XP EPS Trails and Rocks Edition 2018-2022
Fit for Polaris RZR 1000 XP EPS Ultimate 2023-2024
Fit for Polaris RZR 1000 XP LE EPS 2017
Fit for Polaris RZR RS1 1000 EPS 2018-2022

(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitment)

Package Includes:
1x Cylinder
2 x Pistons
2 Sets Piston Rings
2 x 20mm Piston Pins
2 Sets Piston Pin Circlip
1 x Cylinder Base Gasket
1 x Cylinder Head Gasket
1 x Exhaust Gasket Gasket
1 x Water Inlet Gasket
8 x Valve Stem Seals

(Comes exactly as pictured.)

Note:
Carefully compare to your old parts to be sure this is the correct part for your machine.

The product on offer is an accessory or spare part and thus is not an original product of the vehicle manufacturer.
The name of the vehicle manufacturer is stated only as an indication of the determination of the product being offered as an accessory or spare part, to clarify, for which vehicle the product on offer Fits.

Warranty:
Returns: Customers have the right to apply for a return within 60 days after the receipt of the product
24-Hour Expert Online: Solve your installation and product problems

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 11596457819

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 1247 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
J feathers
Charlottesville, US
★★★★★ 5
Works great. Very happy
Size: 4 oz Kit, Size: 4 oz Kit
This stuff was amazing. It literally is dye i used gloves and put it on my jeep bumpers, trim that was black my running boards and top half of jeep.. looks brand new.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026
M
Verified Purchase
morey smith
West Palm Beach, US
★★★★★ 5
Easy to apply.
Size: 4 Oz
Product did a great job renewing my plastic house shutters. It brought back the deep rich color and made them look better the new.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
S
Verified Purchase
Stuart R. Stengel
Natrona Heights, US
★★★★★ 5
Great Stuff
Size: 120 ML
Product is good, Easy to spread for the most part. The only complaint I would give it is that the applicators do not hole up after several applications, I would suggest using a microfiber cloth to apply.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 1, 2026
T
Teresa Wilson
San Leandro, US
★★★★★ 5
Restored My Trim Instantly
Size: 120 ML
I used this plastic restorer on the faded trim around my SUV, and the difference was immediate. The dull gray plastic turned back to a rich black color within minutes. It spreads evenly and doesn’t leave greasy streaks behind. After a few weeks and several rainy days, the finish still looks great. My car honestly looks years newer now.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2026
E
Verified Purchase
Eric J. Jenislawski
Lowell, US
★★★★★ 5
Great result, exceptional value, and easy, forgiving application.
Size: TRIM COAT KIT
I am thoroughly pleased with the results of this product, and the application was easier than I expected. Outstanding stuff. I am writing a longer review in case it helps people who are unsure about a "once and done" product that calls itself permanent. It's not hard to apply. It is forgiving and there's time to even it out. But here are some things to anticipate. My use case: I used Cerakote to restore the plastic trim on a used 2014 black Dodge Challenger that had been repainted but the plastic trim was original and it had been kept outside by the prior owner, so the contrast between the new paint and faded trim was noticeable. The trim was originally a deep, dark gray (it is never as black as the paint). It had faded to a medium-gray in many places: running boards on the side beneath the door, below the read bumper (which were also somewhat worn from debris), around the tail lights, and the plastic piece beneath the windshield wipers between the windshield and the hood. These were all looking weathered. The trim was very oxidized in some places, chalky grey near the hood and around the back bumper. The plastic around the tail lights also had light streaks in it from where water drains down from the trunk. What else I tried before I tried Cerakote: I got middling results from Mother's Back to Black. It looked somewhat better for a week or two, and then it went back to looking as before. Not impressed. I got a tip online to try rubbing the plastic trim with a melamine magic eraser, so I did that next, and this made a significant difference. Melamine is abrasive, so be careful if you do this on your trim. I went gently, up-and-down, side-to-side and in small circles, by hand, with gentle pressure like one would with a polishing compound. By removing the oxidation, the plastic was a few shades darker in the worst spots and the streaking on the rear tail light piece was gone. The rough spots on the trim at the bottom of the car and around the wheels looked somewhat better. But it certainly did not "like new." Cerakote experience: I decided to give Cerakote a try based on the video and good reviews. Bam! Back to factory-like deep dark gray. I wish I had taken pictures. It's incredible. Fully satisfied! I had already washed the trim with Dawn dish soap. I started with the trim bone dry. You are warned everywhere that water droplets will ruin the result, so don't expect to do this process right after you wash the car unless you like to live dangerously and have compressed air to spray cracks and crevices. I was worried that application would be streaky if I didn't do it right. Not so. It is forgiving. Here's what I learned. 1) The first 20% of what you'll get out of the packet goes on heavy with the lightest touch. One packet goes a long way. The next 60% is the "normal" application. This goes on the easiest. You can really milk the last drop out of each towelette, but I didn't because the last 20% of what you can get out of it by rubbing it really hard comes out very light and is not worth the uneven application unless you have some random area you don't care much about and want to use the remainder for that. I only used 5 packets to do the whole car. When you start a new packet, the beginning is where you might want to go back later and even it out once the application gets more normal. Or better, start a new packet on a big section to spread it around well and then move to smaller trim when the towelette is less fresh. 2) You've got time to work with it and make corrections. It stayed liquid like water for at least 20 minutes in my conditions: about 80 degrees, not very humid, indirect sunlight on an 80 degree car. Don't apply in direct sun or on a hot car. The product then gets sticky as it cures, but you can still work with it during the sticky time, rubbing it in and spreading it evenly with the towelette. I did not use a microfiber to "knock down" heavy spots. I just came back around with the towelette. I think a dry microfiber might pull off too much product. When it is half-cured, it is sticky and you can buff it with the towelette at this stage to further flatten and even things out. Work in sections, one piece of trim at a time. 3) Overlaps won't show as long as you rub it all in thoroughly. I tried the overlapping parallel passes method that they recommend, and this works pretty well. I was worried that I might get a "double heavy" streak where the passes overlap but this not so unless the towelette is fresh, but this is fixable. You can do a pretty natural, casual back-and-forth motion for the most part and it comes out fine. This is NOT a super-finicky product. I made a second or third back-and-forth pass in a few areas, and used circular motion in some places where the trim was textured or a little rough from wear, and it all looked even in the end. Just rub it down into the plastic and even out the sheen while it is uncured and it's good. 4) It cures like you see it when it's still wet. It doesn't lighten up very much as it cures. It just looks a little less wet. So get it right by eye when it is wet and that's pretty much what you will still have in an hour when it is cured. 5) Don't miss a spot! You'll see it for sure if you do because the different is so dramatic. And a "second coat" is not easy or recommended. This is the only once-and-done part that you want to get right, and you have plenty of cure time to be thorough. 6) Use the folded corner of the towelette to get into small corners and edges, like where the trim meets the paint or has an inside corner or some little nook. A fresh towelette is great for getting into small areas because a feather touch applies plenty of product when the towelette is fresh. The trim now looks amazing and I am entirely satisfied. I will use Cerakote on my other vehicles. The only minor con is a strong ammonia smell when you are up close to it while it is wet. No smell once it is cured. I would definitely wear the recommended gloves while applying. As others say, you will probably drop that towelette on the ground. It's slippery when wet. Keep it folded in quarters as it comes for ease of application. Turn to a new quarter once a side gets dirty or dry and fold it inside out for four more quarters to use. Bonus, but off-label -- at your own risk: The product is not intended for the soft rubber around the windows, but I tried it there too, and it looks amazing. All I did was wash the rubber with dish soap like the trim, and I rubbed it a few times with a wet microfiber cloth to get the superficial layer of oxidized rubber off. Then I applied Cerakote. It looks great. The rubber used to be blotchy and faded. The microfiber evened this out a little. I would not use melamine on the rubber -- this made it look worse in a test section. The Cerakote made it look great: jet black, much shiner, and much more even looking. Not quite "brand new" but far better than I thought possible. I thought I might need to replace the rubber. Now it's looking great next to the jet-black new paint. This afterthought use alone was worth the money. Can you apply a second coat the next day? They don't say you can, and I don't recommend it. This is meant to be one-shot, which is why you should check to make sure you don't miss any spots. I had two areas where I tried a second coat the next day. The first was on the plastic trim between the windshield and the hood. I didn't rub this trim much with melamine beforehand so there was a lighter area (light grey originally, the worst spot) that didn't get as black as the other sections so I did it again, which helped a little, but not much. I didn't wash this area with soap beforehand because I wasn't intending to fix it until I got going. Once you put things back to black you will start noticing other faded things more. Likewise, I did a second coat on the very top of the soft rubber at the bottom of the windows (the part which faces upward and thus gets the most sun), it wasn't as shiny as the other parts, so I went over that section gently again the next day with a fresh towelette. As soon as I did it, I thought it was a mistake. This didn't go well initially because the cured coating is very hydrophobic so the new, wet, Cerakote of the second coat goes on smooth initially and then "puddles up" into little droplets a few minutes later. It doesn't want to stick to the first coat. I thought I had messed it up, but I let it cure a little until the sticky phase, and spread it out again with the towelette. It stayed that time but gathered back a little into some streaks. I spread it once more a few minutes later and it looked good. It stayed even. It looks just fine a few days later, so I think it cured OK. I hope this product last for months as advertised. Even if it doesn't I would totally do it again because the results are superior, I still have half my towelettes left, and the product is not expensive. 10/10 would do again and will recommend to everyone.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 25, 2025

recommand products

Husky Towing 31570 Replacement Housing/ Head and Yoke For 26000 Pound Hitches
220.00
Husky Towing 31574 Pivot Pin Hardware Kit For 31318/ 31326/
51.00
Husky Towing 31852 Bracket Clamp-On No Drilling Required
117.50
HKM-686419 Waterproof Kennel - Bite-Resistant, Scratch-Resistant, Removable Washable Mat, Suitable for All Seasons
77.99
DISCONTINUED Husky Towing 31610 With Brute Super Foot Extend Reach 7 Fits 2 & 2-1/2 Jacks 6500 LB Cap
73.00